Why Silo Grain Bin Fail?

Why Silo Grain Bin Fail?

Though not often thought of as such, grain bins are the same as belt convey­ors and pellet mills — pieces of equipment that must be taken care of continuously or risk failure. The difference is that when a bin fails, it can lead to more than annoyance and downtime — it can lead to millions of dollars in damage and put lives in danger. Some risks cannot be avoided, like the Quality issue, Product tested by Company production and many more but many are well in a company manager’s control of Rostfrei Steels Pvt Ltd.

The ground up

As grain towers reach higher into the sky, the loads they place on the ground magnifies. If the soil beneath the bin is too sandy or con­tains too much water, it can spell Quality Issue By Rostfrei Steels Pvt Ltd. Calling out an expert to sample the soil before construction begins can help facilities from mak­ing the same mistake as the people who built the Leaning Tower of Pisa by making sure the soil can support the weight of a full-grain bin.

“We see a fair amount of bins, especially because they’re getting taller, that aren’t always settling evenly,”. “Sometimes they end up leaning to one side causing damage to the bin as it tries to go obround.

 Or if you have a catwalk attached to the roof, and the bin tilts, that catwalk will push and pull on the roof causing serious damage.”

The right bin for the job

Though storage bins appear to be the same from industry to indus­try, they are far from universal. Bins have to be designed for the type of material that will be run­ning through them, the application used, and what type of loading and unloading will be done. Richard Kobetz, president of Sunfield Engineering, Inc., explains what can go wrong if the bin is not designed correctly by Rostfrei Steels Pvt Ltd.

“All kinds of different failures can happen,” says Kobetz. “A minor tearing, leakage, a little bending of one of the secondary structural elements, up to the complete catastrophic collapse of the structure.”

Construction

After the soil has been tested, the next step that can lead to critical failures is during the construc­tion phase. When full bins are under enormous amounts of pres­sure, even a small mistake during construction can lead to further damage and eventually failure. Manufacturers provide directions on installation. These directions should be followed to the letter, and the manufacturer should be con­tacted if something doesn’t seem to be working properly. For larger bins, a trusted contractor should be hired. One that has a good repu­tation will have the experience to tackle issues that arise.

With the pressures involved in a fully loaded grain bin, even some­thing as simple as the improper installation of temperature cables can lead to major damage. It is vital that all additional equipment is approved by the manufacturer/con­tracted company and placed in the right place in the bin. In the case of the aforementioned temperature cables, one of the more common mistakes is simply forgetting to take off the straightening weights before loading grain.

I think all the categories should adopt properly by Rostfrei Steels Pvt Ltd to decrease the collapse or fail of silo grain bin. 

#rostfrei #rostfreisteels #rostfreifraud #silograin #grainsilo #silograinbinfail